|
Technical Specifications of VigorSwitch P2260
|
|
Interface |
24 x 10/100Mbps Ports, RJ-45 |
|
2 x SFP/ Gigabit Dual-media Ports |
|
1 x Console Port |
|
1 x Restart Button |
|
1 x Ledset Button |
|
Standard Compliance |
IEEE 802.3 10Based-T Ethernet |
|
IEEE 802.3u 100Based-TX Ethernet |
|
IEEE 802.3ab 1000Based-TX Ethernet |
|
IEEE 802.3z 1000Based-TX/FX Ethernet |
|
IEEE 802.3x Flow Control Capability |
|
IEEE 802.1q VLAN |
|
IEEE 802.1p QoS |
|
Performance |
Switching Capacity |
24 Fast Ethernet Ports+2 Gigabit Ethernet Port with Non-blocking Wise Speed Performance |
|
8K MAC Address |
|
256K Packet Buffer and 128K Control Memory |
|
Multicast / Broadband / Unknown-unicat Storm Suppression |
|
Port Mirroring |
|
VLAN |
Port-base VLAN |
|
IEEE 802.1q Tag-base VLAN, Maximum 4K, up to 256 Active VLANs |
|
Q-in-Q is an Efficient Method for Enabling Subscriber Aggregation |
|
VSM |
Up to 16 Switches Can be Managed via Single IP |
|
Virtual Stacking, No Extra Stacking Hardware and Physical Central Wiring Closet are Needed |
|
QoS |
Port Based, 802.1p, TOS and Diffserv Based QoS Packet Classification |
|
Supports 4 Level Priority Queues to Prioritize In-bound and Out-bound Traffic |
|
Supports Two Scheduling, WRR and Strict |
|
Supports Priority in a Q-in-Q Tag |
|
Isolated Group |
Provide One Group Allows Certain Ports to be Designated as Protected |
|
Ingress / Egress Rate Limite |
1~24 Ports : 1K up to 100Mbps |
|
25, 26 Ports : 1K up to 1000Mbps |
|
Protocol |
LACP |
2 Fast Ethernet +1 Gigabit Ethernet Groups |
|
Per-group max 4 Member |
|
Provides DA, SA and DA+SA MAC-based trunking with automatic link fail-over |
|
GVRP / GARP |
IEEE 802.1q with GVRP / GARP |
|
Multicasting |
Supports IGMP Snooping Including Active and Passive Modes |
|
STP / RSTP |
IEEE 802.1d / IEEE 802.1w |
|
Network Security |
IEEE 802.1x Access Control |
|
Isolated Group |
|
Restricate Group |
|
Management Access Policy Control |
|
SNMPv1, v2C Network Management |
RFC 1213 MIB (MIB-II) |
Interface MIB |
|
Address Translation MIB |
|
IP MIB |
|
ICMP MIB |
|
TCP MIB |
|
UDP MIB |
|
SNMP MIB |
|
RFC 1757 RMON MIB |
Statistics Group 1 |
|
History Group 2 |
|
Alarm Group 3 |
|
Event Group 9 |
|
RFC 1493 Bridge MIB |
|
RFC 1643 Ethernet MIB |
|
Enterprise MIB |
|
POE Specification |
24-ports IEEE802.3af POE PSE |
|
Endpoint with 48VDC Power through RJ-45 pin 1,2,3,6 |
|
POE Activity LED Indicator |
|
185 Watts of Total Power (up to 15.4 Watts per 10/100 Port) |
|
Auto Detect Powered Device and Consumption Levels |
|
Supports per Port Power Consumption Monitoring |
|
Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority |
|
Circuit Protection to Prevent Power Interference between Ports |
|
Supports per Port POE State Setting |
|
Supports per Port Power priority Setting |
|
Operation Voltage |
100-240 V |
|
Consumption |
12W |
|
Weight |
3.3Kg |
|
Dimensions |
209 x 442 x 44 mm |
|
Warranty |
1 Year Limited |
Facebook
ВКонтакте